home *** CD-ROM | disk | FTP | other *** search
/ Best of www.BestZips.com (Collector's Edition) / Best of WWW.BESTZIPS.COM Collector's Edition (JCSM Shareware) (JCS Marketing).ISO / db_other / llist33a.zip / LISTINFO.TXT < prev    next >
Text File  |  1996-12-19  |  16KB  |  306 lines

  1.                            L I T T L E   L I S T S
  2.                         G E T T I N G   S T A R T E D
  3.                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  4.  
  5.    QUICK START:
  6.    To run the program from a DOS prompt, enter: LITTLE
  7.    To read the on-disk manual, enter: LDOC
  8.  
  9.    REVIEWERS: If you intend to review this software for publication, please
  10. contact us to make sure you have the most recent version and that the
  11. ordering information supplied to your readers will be accurate. We would
  12. appreciate receiving a tearsheet or copy of any published reviews. Thank
  13. you!
  14.  
  15.    ALWAYS MAKE A BACKUP COPY of the original disk before you do anything.
  16. (See the DISKCOPY command in your DOS manual.) Put the original in a safe
  17. place, and use the copy as the master disk when you install the program.
  18.    Note that in all of the following examples, if your drive letters or
  19. directory names are different, you can simply use the same command, but
  20. with your actual drive letter and directory name. For example, we refer to
  21. the floppy drives as drive A and drive B. If yours are really called drive
  22. D and drive E, then use D and E instead of A and B. In our hard disk
  23. example, the subdirectory is called LITTLE. But you can name it something
  24. else. For example, if you name it WEST, just use WEST in the command
  25. instead of LITTLE.
  26.    The following instructions assume the files on your disk are NOT
  27. archived. If you have received the files in archived format, refer to the
  28. installation instructions that came with your disk.
  29.  
  30.    INSTALLING TO A HARD DISK: The first thing you need to do is create a
  31. subdirectory on the hard disk. (If the subdirectory has already been
  32. created, you don't have to create it now.) For example, if you decide to
  33. name the subdirectory LITTLE, you would start at your C> prompt, and use the
  34. following sequence of commands:
  35.  
  36.    CD\
  37.    MD LITTLE
  38.    CD \LITTLE
  39.  
  40. Now put the master disk in the A drive and enter this command:
  41.  
  42.    COPY A:*.*
  43.  
  44. You should see all the files being copied. When the copying is finished,
  45. you are ready to run the program.
  46.  
  47.    INSTALLING TO A FLOPPY DISK WHEN YOU HAVE TWO FLOPPY DRIVES: Put the
  48. master disk in drive A. Put a new, formatted disk in drive B. Enter this
  49. command:
  50.  
  51.    COPY A:*.* B:
  52.  
  53.    You should see the files being copied to the disk in the B drive. When
  54. all the files have been copied, the B disk is your working disk. You can
  55. move  the B disk to the A drive and use it there if you prefer.
  56.    For greatest efficiency and maximum storage capacity, we urge you to
  57. install the software to your hard disk.
  58.  
  59.    INSTALLING TO A FLOPPY DISK WHEN YOU HAVE ONE FLOPPY DRIVE: Put the
  60. master disk in drive A. Have a new disk ready. Enter this command:
  61.  
  62.    DISKCOPY A: B:
  63.  
  64.    The computer will display messages telling you when to put the "source
  65. disk" or the "target disk" into the drive. The "source disk" is your master
  66. disk. The "target disk" is your new disk. When all the files have been
  67. copied, the "target" disk is your working disk.
  68.    For greatest efficiency and maximum storage capacity, we urge you to
  69. install the software to your hard disk.
  70.  
  71.    NEED MORE SPACE? If you are running programs on floppy disks you may not
  72. have enough disk space for the data files created by the program. You can
  73. remove the documentation files, which the program does not need, from your
  74. working disk. However, these files contain important information which you
  75. will need for reference, so do not delete them from your master disk. To
  76. delete the documentation files, put the working disk in the A drive and
  77. enter these commands:
  78.  
  79.    DEL A:*.TXT
  80.    DEL A:*.DOC
  81.  
  82.    The documentation files must be included with copies of the program that
  83. are distributed to others.
  84.  
  85.    PROGRAM FILES: Program files can be identified by the extension EXE or
  86. COM after the file name. To run the program, simply type its name. For
  87. example, if you have a program named LITTLE.EXE, type LITTLE and press
  88. <ENTER>.
  89.  
  90.    DOCUMENTATION AND INSTRUCTIONS: The on-disk manual appears in an
  91. executable file named LDOC.EXE. To view the manual from the DOS prompt,
  92. type LDOC and press <ENTER>. You can page through the document on
  93. screen, or print it by pressing <ALT><P>. For  a list of helpful commands,
  94. press <F1>.
  95.    All features of LITTLE LISTS are documented in the on-disk manual. To
  96. save disk space, this manual may not contain all the extra explanatory
  97. material and examples which are included in the printed manual provided to
  98. registered (paid) users. The printed manual also includes a table of 
  99. contents and index.
  100.    Files which have the DOC or TXT extension are ASCII format files (also
  101. called DOS Text files) which can be viewed or printed using DOS commands.
  102. For example, if you have a typical setup, you can print a document called
  103. LISTINFO.TXT using this command:  TYPE LISTINFO.TXT > PRN
  104.    To view this file on screen, you would enter: TYPE LISTINFO.TXT | MORE
  105. (Successful use of MORE assumes that the correct DOS files are in your
  106. path. If this is not the case, you can simply use TYPE LISTINFO.TXT, but the
  107. file may scroll up out of view.)
  108.    You can also view and print this kind of file with text viewing
  109. utilities, and with most word processors, using "ASCII", "DOS Text" or
  110. "Non-document" format.
  111.  
  112.    CHANGES AND UPDATES: Sometimes changes are made in a program after the
  113. manual is completed. Information about such changes will appear on disk in
  114. a text file called UPDATE.TXT. If this file appears on your disk, you
  115. should read it to get the latest important information about the software.
  116.  
  117.    NEW VERSIONS: Sometimes a new version of a program will ask permission
  118. to update your data files. Do not answer "yes" unless you have already made
  119. a backup copy of your data. Don't copy the backed-up data back into the
  120. directory after the files have been updated. This backup is simply
  121. insurance against data damage or loss. You should make backups regularly.
  122.  
  123.    BE SMART!  Before installing new versions of any software, make backups
  124. of all the old files. This protects you in case of an error during the
  125. installation/update process. Remember that power surges, hardware failure,
  126. and user errors can all lead to data loss or damage. Make backups of your
  127. data on a regular basis. If you wonder how often you need to back up your
  128. word processing documents, mailing lists, spreadsheets, etc., ask yourself,
  129. "How many days worth of work can I afford to lose?" We recommend that you
  130. use a system of three or more sets of backup disks which you rotate on a
  131. daily basis. That way, if something unfortunate happens to one set of
  132. backups, you will have another set available. A few minutes spent making
  133. daily backups can save you hours of heartbreaking work trying to recreate
  134. lost data.
  135.  
  136.    BAD DISK? It seems that in hot weather we sometimes get complaints about
  137. "bad" or unreadable disks. Floppy disks are susceptible to heat, moisture
  138. and magnetism. A disk that sits all day in a hot mailbox or truck where
  139. temperatures exceed 100 degrees is likely to be damaged. Disks which have
  140. been exposed to magnetism may become unreadable.
  141.    Before assuming a disk is bad, try it on another computer. It may be
  142. that your computer's drive heads are dirty or slightly misaligned. Suspect
  143. this if you often get disk error messages with different disks. An
  144. inexpensive head cleaning kit may help solve the problem.
  145.    With 5.25" disks, sometimes the round disk gets trapped inside its
  146. square  casing and generates an error because it can't rotate freely.
  147. Remove the  disk from the drive and tap each of the four edges sharply on
  148. the surface  of your desk. This may loosen the disk. Try reading the disk
  149. again.
  150.    With 3.5" disks, the sliding plate may not be sliding open when the disk
  151. is placed inside the drive. Gently slide the plate back and forth until it
  152. feels looser, being careful not to touch the disk media inside. Try reading
  153. the disk again. If the plate will not slide, or it it appears to be bent,
  154. do not place it inside the drive. Instead, you can simply remove the plate,
  155. which protects the disk but is not required for us.
  156.    Several popular utility packages have features that can sometimes
  157. revive unreadable disks.
  158.    In any case, if we sent you an unreadable disk, we will be happy to
  159. replace it with a fresh copy of the same program. If you received a bad
  160. disk from a vendor, the vendor should replace it.
  161.  
  162.    SUPPORT: This software has been thoroughly tested, and complete
  163. instructions are contained in the user's manual.
  164.    For fast, reliable answers to your questions, visit the R.K. West
  165. sections on CompuServe and America Online. On CompuServe, GO RKWEST. On 
  166. AOL, use the keyword RKWEST. You'll be able to download evaluation 
  167. versions of our new products and other materials in the file libraries.
  168.    Support by mail is FREE. Mail support to registered users is generally
  169. unlimited. However, if a user's support needs become excessive or
  170. unreasonable, we may limit the number of support requests which may be
  171. submitted in a single week or a single month.
  172.    Unregistered users: We appreciate receiving a self-addressed, stamped
  173. envelope with your inquiry. Free support to unregistered users will be
  174. limited to getting you up and running, or responding to error messages.
  175.    Visit our WWW home page at http://members.aol.com/rkwest
  176.  
  177.    SOFTWARE LICENSE AND WARRANTY INFORMATION: See the file VENDINFO.DIZ.
  178. If VENDINFO.DIZ is missing or damaged, or if you do not understand it,
  179. contact the author for complete information.
  180.  
  181.    SITE LICENSING: A site license is an inexpensive way for more than
  182. one person to legally use one copy of a program on more than one computer
  183. at a time. Site licenses are designed for companies, offices or workgroups
  184. where more than one person in the organization needs to use a product, but
  185. does not need additional manuals or disks. Site licensing enables
  186. companies, departments, government agencies, etc., to equip their personnel
  187. with the tools they need at a minimal cost.
  188.    Here's the gist of how it works:  The company purchasing a site license
  189. (the licensee) provides a single point of contact for shipping, technical
  190. support, upgrades, etc., and we (the licensor) provide "golden masters" of
  191. the diskettes, manuals, and any other parts of the package.
  192.    The following chart gives a breakdown of the cost of site licensing and 
  193. how much you save per site licensed. For instance, if the normal registration
  194. fee for one copy of the software is $15.00, and you purchase a site
  195. license for 11 users (sites) your cost will be $115.50, which saves you
  196. $49.50 of the cost of 11 separate purchases. The more sites you license,
  197. the more you save.
  198.  
  199. SAMPLE SITE LICENSING CHART FOR A PROGRAM WITH A $15.00 REGISTRATION PRICE:
  200.  
  201.                      Discount      Price Per      Savings
  202.      Quantity       Percentage       Unit         Per Unit
  203.  
  204.        5 -  10          25%          $11.25         $ 3.75
  205.       11 -  15          30%          $10.50         $ 4.50
  206.       16 -  20          33%          $10.05         $ 4.95
  207.       21 -  25          36%          $ 9.60         $ 5.40
  208.       26 -  30          39%          $ 9.15         $ 5.85
  209.       31 -  40          42%          $ 8.70         $ 6.30
  210.       41 -  50          45%          $ 8.25         $ 6.75
  211.       51 -  60          48%          $ 7.80         $ 7.20
  212.       61 -  70          51%          $ 7.35         $ 7.65
  213.       71 -  80          54%          $ 6.90         $ 8.10
  214.       81 -  90          57%          $ 6.45         $ 8.55
  215.       91 - 100          60%          $ 6.00         $ 9.00
  216.  
  217.      101+           By special arrangement
  218.  
  219. To receive further information, please contact R.K. West Consulting, 
  220. PO Box 8059, Mission Hills CA 91346, USA; FAX 818-366-1737; 
  221. Email rkwest@ProMail.com.
  222.  
  223.    EVALUATION: Many software developers choose marketing methods which
  224. allow copyrighted programs to circulate among users for purposes of
  225. evaluation. This gives you the option to "Try Before You Buy". Using this
  226. system, the author of a program typically allows you to try the program for
  227. up to 30 days before payment is required. The exact terms of evaluation
  228. vary from author to author, so be sure to check the documentation of the
  229. programs you evaluate.
  230.    Any fee you pay to a disk vendor is simply a distribution fee, and does
  231. not cover the cost of the program itself. Disk vendors are required to
  232. inform customers of these facts. Programs which are used beyond
  233. the author's prescribed evaluation period require separate payment to the
  234. author. By making payment to the author you obtain a legal right to use the
  235. software, and encourage the continued development of quality software
  236. for this type of marketing.
  237.    The process of paying for the software is often called "registration".
  238. The exact benefits of registration vary from author to author, but many
  239. authors will offer one or more of the following: a current version,
  240. technical support, a printed manual, free or discounted upgrades, bonus
  241. utilities or special offers. Consult the registration information included
  242. with each program for specific details.
  243.  
  244.    REGISTRATION: When you pay for LITTLE LISTS, you will receive:
  245.  
  246.    * A copy of the most recent version of the program, without any
  247.      payment reminders.
  248.    * A printed, indexed manual.
  249.    * A license to continue using the program.
  250.    * Technical support by fax, mail, and email.
  251.    * Notice of upgrades, new releases, and new products.
  252.    * Discounts on upgrades and other products.
  253.  
  254.  To: R.K. West Consulting                    LITTLE LISTS ORDER FORM
  255.      PO Box 8059
  256.      Mission Hills CA 91346, USA
  257.  
  258.  Your Name: ________________________________________________
  259.  
  260.  Address: __________________________________________________
  261.  
  262.           __________________________________________________
  263.  
  264.           __________________________________________________
  265.  
  266.  Phone:   __________________________________________________
  267.  
  268.  _____ Registered versions @ $19.00 each:                __________________
  269.  
  270.  _____ Shipping outside the USA: Canada $3.00/Other $6.00 _________________
  271.  
  272.  Disk Size: ___ 3.5   ___ 5.25         TOTAL ENCLOSED:    _________________
  273.             3.5" is best
  274.  
  275.  All prices are in U.S. dollars, checks drawn on and payable through a U.S.
  276.  bank. You may register by credit card through Public (Software) Library.
  277.  In the USA call 800-242-4775. Others, call 713-524-6394. These numbers are
  278.  for orders only. The operators cannot answer any questions about anything.
  279.  You can Fax a credit card order to PsL at 713-524-6398;
  280.  or mail it to: PSL, P.O. Box 35705, Houston TX 77235; or order on
  281.  CompuServe from 71355,470. Visa, MasterCard, Discover, American Express.
  282.  When ordering by credit card use your name EXACTLY as shown on the card.
  283.  Please do not mail credit card orders to R.K. West (and do not mail checks
  284.  to PSL).
  285.  
  286.  Tell us where you found this program! ___________________________________
  287.  
  288.    _______________________________________________________________________
  289.  
  290.  Important: If you purchased this disk from a rack, bin, shelf or package
  291.             in a retail store, grocery, airport, bookshop, etc., or found
  292.             it on CD-ROM, please include the company name or brand-name
  293.             logo from the disk package or label, and other information,
  294.             such as address and phone, identifying the company that
  295.             actually produced the disk.
  296.  
  297.    _______________________________________________________________________
  298.  
  299.    _______________________________________________________________________
  300.  
  301.    _______________________________________________________________________
  302.  
  303.  What are your comments about LITTLE LISTS? (Use other side if needed)
  304.  
  305.  
  306.